Kurt Behn Logo Print
Interboot Logo Hamburg Boat Show Logo Boot Düsseldorf Logo

Saloon tables



Tischlerei Kurt Behn Logo View on saloon table with column basis saloon tables
View on saloon table with string basis and low middle part View saloon table with folding down table wings View on table top corner View on beverage flap View beverage shelf View on the table top edges with small curve on the the table length Blindbild
View on saloon table with column basis View on saloon table with string basis and deep middle part with beverage shelf View on saloon table with column basis and two drawer

Product description:



Saloon tables are manufactured by us with the highest craftsmanship precision. So we pay attention from the beginning to even veneers and selected woods. Depending on your taste you can get the table with columns or string base, bar shelf, drawers and secret compartment.
The table tops are made to your dimensions. All versions are available in teak and mahogany (other types of wood are possible).
All existing fittings are made of nickel-plated brass or stainless steel.

The production:


Salon table top:

The salon table tops are always made to measure. It does not matter, whether square, rectangular or trapezoidal. The outside dimensions may not exceed 1300x700mm.
You can get the table top as a simply continuous plate, with one or both sides hinged side wings and/or additional beverage flap.
You can choose whether you want to have the edge design with anti rolling strips or the table top should better remain flush with the top edge. For better optics, all tabletops get a slight stitch arch on the long edges. The production is based on an 18mm Okumé/Gabon plywood with both sides thick veneers. The visible edgings are evenly applied around the table top. All connections are glued waterproof.
The delivery is fine sanded, otherwise natural.

Table bases:

For the finished table bases, we offer three options. From a simple string-foot basis with a side opening for magazines or other things, over a slightly lower drawn string basis with bar shelf up to the column base with side drawers, bar shelf and secret compartment.
Here too, all compounds are glued waterproof and all surfaces are fine sanded. The delivery is natural.


Cross-section, saloon table top with anti rolling stripe:


Cross-section, saloon table top with anti rolling stripe

Cross-section, saloon table top without anti rolling stripe:


Cross-section, saloon table top without anti rolling stripe

Price table tops:


StandardtischplatteStandard table top:
Table top with 1.5mm sliced cut veneers on both sides.
Edges with massive slinger strips. All gluing WBP. Corners open. Neither to fold down, nor with beverage flap.
Manufactured according to your specifications up to a maximum size of: 1300 x 1100mm.
Form options: Rectangular, square or trapezoidal.
Production: Teak or mahogany, natural finish.

Article no.:
Description:
Thickness in mm:
Material:
Price per:
Price netto in €:
Preis incl. 19% VAT in €:

300TE01
Saloon table top with teak veneer,as standard top. Maximum dimension: 1300x 1100mm
20mm
Teak
Piece
433.47
515.83
300MA01
Saloon table top with Ma­ho­gany veneer, as standard top. Maximum dimension: 1300x 1100mm
20mm
Sipo- Ma­ho­gany
Piece
433.47
515.83

Tischplatte abklappbarTable top hinged on one or both sides:
Table top with 1.5mm sliced cut veneers on both sides.
Edges with massive slinger strips. All gluing WBP. Corners open. One- or both sides fold down, without beverage flap.
Manufactured according to your specifications up to a maximum size of: 1300 x 1100mm.
Form options: Rectangular, square or trapezoidal.
Production: Teak or mahogany, natural finish.

Article no.:
Description:
Thickness in mm:
Material:
Price per:
Price netto in €:
Preis incl. 19% VAT in €:

300TE02
Saloon table top with teak veneer. Maximum dimension: 1300x 1100mm, one- or both sides foldable with beverage flap
20mm
Teak
Piece
554.62
660.00
300MA02
Saloon table top with Ma­ho­gany veneer. Maximum dimension: 1300x 1100mm, one- or both sides foldable with beverage flap
20mm
Sipo- Ma­ho­gany
Piece
529.41
630.00

Tischplatte abklappbar mit BarfachTable top hinged on one or both sides:
Table top with 1.5mm sliced cut veneers on both sides.
Edges with massive slinger strips. All gluing WBP. Corners open.One- or both sides fold down, with beverage flap.
Manufactured according to your specifications up to a maximum size of: 1300 x 1100mm.
Form options: Rectangular, square or trapezoidal.
Production: Teak or mahogany, natural finish.

Article no.:
Description:
Thickness in mm:
Material:
Price per:
Price netto in €:
Preis incl. 19% VAT in €:

300TE03
Saloon table top with Teak veneer. Maximum dimension: 1300x 1100mm, one- or both sides foldable with beverage flap
20mm
Teak
Piece
650.20
773.75
300MA03
Saloon table top with Ma­ho­gany veneer. Maximum dimension: 1300x 1100mm, one- or both sides foldable with beverage flap
20mm
Sipo- Ma­ho­gany
Piece
622.23
740.45

Price table racks:


Tischgestell WangenfussTable rack with stringer base:
Basis about 700 mm high and 660mm wide, consisting of two solid stringer feet and with 4 folding consoles.
Middle part height ca. 180mm with shelf for e.g. newspapers. Anything glueing WBP.
Production: Teak or mahogany, natural finish.

Article no.:
Description:
Format
Material:
Price per:
Price netto in €:
Preis incl. 19% VAT in €:

301TE03
Table rack in string base. Middle part height ca. 180mm with a shelf for e.g. newspapers.
700x660mm
Teak
Piece
369.14
439.28
301MA03
Table rack in string base. Middle part height ca. 180mm with a shelf for e.g. newspapers.
700x660mm
Sipo- Ma­ho­gany
Piece
335.59
399.36

Tischgestell Wangenfuss 440mmTable rack with stringer base:
Basis about 700 mm high and 660mm wide, consisting of two solid stringer feet and with 4 folding consoles.
Middle part height ca. 440mm with beverage flap. Anything glueing WBP.
Production: Teak or mahogany, natural finish.

Article no.:
Description:
Format
Material:
Price per:
Price netto in €:
Preis incl. 19% VAT in €:

301TE01
Table rack in string base. Middle part height ca. 440mm with beverage shelf
700x660mm
Teak
Piece
440.45
524.14
301MA01
Table rack in string base. Middle part height ca. 440mm with beverage shelf
700x660mm
Sipo- Ma­ho­gany
Piece
412.49
490.86

Tischgestell SäulenfussTable rack with column base:
Basis about 700 mm high and 660mm wide, with 4 folding consoles and beverage shelf. In the lower area with two drawers and a secret compartment.
Anything glueing WBP.
Production: Teak or mahogany, natural finish.

Article no.:
Description:
Format
Material:
Price per:
Price netto in €:
Preis incl. 19% VAT in €:

302TE01
Table rack with column basis, with beverage shelf, 2 drawers and secret compartment
700x660mm
Teak
Piece
1146.58
1364.43
302MA01
Table rack with column basis, with beverage shelf, 2 drawers and secret compartment
700x660mm
Sipo- Ma­ho­gany
Piece
1104.64
1314.53

Extra charges (summary):


Article no.:
Description:
Price per:
Price netto in €:
Preis incl. 19% VAT in €:

303TE01
Additional drawer
Piece
126.05
150.00
303TE02
Additional beverage flap
Piece
100.84
120.00
303TE03
Recess for example for mast foot
Piece
71.43
85.00


Delivery times:


The delivery times for this product are usually between 3-6 weeks.

View on saloon table with column basis and two drawer View on saloon table with string basis and deep middle part with beverage shelf View on saloon table with string basis and low middle part View saloon table with folding down table wings View on beverage flap View on table top corner View on the table top edges with small curve on the the table length View beverage shelf